Door Controller - Custom Configuration for Multi-Family Admins

Permanently deleted user
Permanently deleted user
  • Updated
Follow

On this page

 

 

Door Controller Custom Configurations

 

Through the VTS Rise platform, we are able to configure how a door is unlocked and how how long the door can remained unlocked. In this article, you will learn how to add custom configurations to your door controller such as:
  • Allowing staff and residents to unlock the door from any location.
  • Change the length of time the door remains unlocked after the unlock trigger happens.
  • Restrict the door from being unlocked on certain days/times.

 

Allow the Door to be Unlocked by Staff or Residents from any Location

 

Using a VTS Rise Door Controller, you can allow your staff and residents the ability to unlock the door with or without being in the presence of a Beacon using LTE or Wifi.

 

This means your staff and resident will be able to unlock the door from any location, whether they are at the property or not.

 

Step 1

 

Upon logging into the Admin Portal, select Advanced and then Hardware.

 

 

Rise_Advanced_Hardware.png

 

 

Step 2

 

Select Edit to the right of the door controller name you wish to allow staff and residents to be able to unlock.

 

 

Rise_Hardware_Edit.png

 

 

Step 3

 

Select the radio box: Allow door to be unlocked without beacon presence?

 

 

allow_door.png

 

 

Step 4

 

Select Submit.

 

 

Change the Length of Time in which the Door Remains Unlocked

 

After a door is triggered to unlock by a visitor pass, resident QR Code, Mobile, or Door Access, the door will remain unlocked for a specified time to allow the individual to open the unlocked door in time before the door locks again. Default configuration setting by VTS Rise is set for: 10 seconds, if you would like to change that, please follow the below steps.

 

Step 1

 

Upon logging into the Admin Portal, select Advanced and then Hardware.

 

 

Rise_Advanced_Hardware.png

 

 

Step 2

 

Select Edit to the right of the door controller name you wish to change the unlock time.

 

 

Rise_Hardware_Edit.png

 

 

Step 3

Indicate how many seconds you would like the door to remain unlocked in the Pulse Duration (in seconds) box. Select Submit to save your changes. 


pulse_duration.png

Restricting Door Access

 

If you would like to restrict access to a door during specific hours so that either no residents, no staff, and/or no residents will be able to unlock it please follow these steps.

 

Step 1

 

Select Advanced from the left navigation menu and then Hardware.

 

 

Rise_Advanced_Hardware.png

 

 

Step 2

 

Select Edit to the right of the door controller name you wish to change the unlock time.

 

 

Rise_Hardware_Edit.png

 

 

Step 3

Select Yes next to Restrict access during certain hours. 

Step 4

Select the day(s) and time you wish to restrict access.

Step 5

Indicate if you would also like to restrict access for staff as well. Select Submit to save your changes. 


restrict_access.png
 


Comments

0 comments

Article is closed for comments.