On this page
Hardware Health Checks for Rise Receive
Rise Receive is a secure device outside of your package room that allows occupants to retrieve packages through a controlled access door by scanning a QR code. Packages must be checked in by personnel using a Rise Staff Tablet.
| Rise Receive is configured by the VTS Rise Hardware team, so there is nothing for you to set up! |
Running a health check allows you to see if your Rise Receive device is online or offline. In this guide, you will learn how to run a Hardware Health Check on your Rise Receive tablet.
From the Dashboard
Step 1
In the Admin Portal Dashboard, under Hardware Status, you are able to check the status of your Rise Receive as well as additional hardware at your property.
| Note: To see the Health Check for Rise Receive, ensure the drop-down is set to Tablets. |
Step 2
Select Run health check. This will refresh the feed.
| If your device is offline, please contact your VTS Rise contact or support. |
From Rise Receive Dashboard
Step 1
After logging into the Admin Portal, select Operations from the left menu and select Packages under Property Services. In the drop-down menu, select Rise Receive.
Step 2
Under Rise Receive Users select the three horizontal dots next to the hardware you want to run a health check on. Under the drop-down, select Hardware Health Check.
Step 3
A pop-up will appear saying the Device is online or the Device is offline.
| If your device is offline, please contact your VTS Rise contact or support. |
Comments
0 comments
Article is closed for comments.